Free calculator

Cleaning service quote calculator

Price a home or small-office cleaning from area, a clean-type time multiplier, crew size and hours, loaded labor, supplies, travel and overhead, and a target margin. Starting-point figures are provided so you can edit them — they are not recommended or average market rates.

Default starting-point example: a 1,500 sq ft home, a standard (1.0×) clean, a 2-person crew for 3 hours at a $30 loaded hourly cost, $25 in supplies, 15% overhead, and a 30% target margin. Labor is 6 person-hours and $180.00. Total cost is $235.75. The quote that holds a 30% margin is $336.79, or $0.22 per sq ft.

Quote

Priced to the target margin you entered.

Total quote—
Price per sq ft—
Implied markup—
Recurring-visit estimate—
  • Adjusted hours on site —
  • Person-hours —
  • Labor —
  • Supplies —
  • Direct costs —
  • Travel / overhead —
  • Total job cost —
  • Quote price —
  • Price per sq ft —
  • Gross profit —
  • Implied markup —
  • Margin —
  • Recurring-visit estimate —
  • Recurring visit per sq ft —

How to use this calculator

Hours on site for the selected type = the standard-clean hours you enter × the time multiplier. Person-hours = crew size × those adjusted hours. Labor cost is person-hours × the loaded hourly cost per person. Supplies are a flat amount for the visit. Travel and overhead are a percent of labor plus supplies. The quote is total cost ÷ (1 − margin), and price per square foot is the quote divided by area.

The recurring-visit estimate uses the same crew, hours, labor cost, supplies, overhead, and margin, with the time multiplier set to 1.0 (a standard clean). It is the arithmetic for that visit, not a package price, membership rate, or recommended discount. If you already entered hours for a deep or move-out clean, set the multiplier to 1.0 so the hours are not scaled again. The 1.0 / 1.5 / 2.0 multipliers are editable starting points, not typical or recommended time factors. Replace every figure with your own. For a job you would rather price from a production rate (square feet per hour), use the square-foot quote estimator. Nothing you type is stored or uploaded.

A worked example

The default figures are 1,500 square feet, a standard 1.0× multiplier, a 2-person crew, 3 hours, a $30 loaded hourly cost, $25 in supplies, 15% overhead, and a 30% target margin. Adjusted hours are 3 × 1.0 = 3. Person-hours are 2 × 3 = 6. Labor is 6 × $30 = $180. Direct cost is $180 + $25 = $205. Overhead is 15% of $205, or $30.75. Total cost is $235.75. The quote that holds a 30% margin is $235.75 ÷ 0.70 = $336.79, which is $0.22 per square foot. Gross profit is $101.04, a 42.86% markup. Because the multiplier is already 1.0, the recurring-visit estimate is the same $336.79.

If the same home is a deep clean and you set the multiplier to 1.5, adjusted hours become 4.5, person-hours 9, labor $270, total cost $339.25, and the 30% margin quote becomes $484.64, or $0.32 per square foot. The recurring-visit estimate stays $336.79 — the same inputs at a 1.0× multiplier.

Common pricing mistakes

Entering hours that already include a deep or move-out clean and then applying a multiplier on top of them double-counts time. Keep the hourly figure as a loaded cost per person, and keep crew size as the number of people those hours describe. A trip or supply allowance of $0 can hide travel and product cost that still has to be covered.

Mixing up markup and margin still applies. A 30% markup on a $235.75 cost is $306.48, which is only a 23.08% margin — not the 30% margin held by $336.79. See the markup vs. margin calculator for the conversion. These results depend on the numbers you enter and are not a recommended price or a guarantee of profit.

Questions

Are the 1.5× and 2.0× multipliers average times for a deep or move-out clean?

No. They are only starting points so the form is not empty. Actual time varies by condition, access, and crew. Edit the multiplier, or set it to 1.0 and enter the hours you expect for that visit.

What is the recurring-visit estimate?

It is the quote recalculated with a 1.0 (standard) time multiplier and every other input held constant. It is not a suggested weekly or monthly package, and it does not apply a discount.

Should I use a billed hourly rate or a cost rate?

Use a loaded cost per person — what an hour costs you, including the labor burden you actually carry. The calculator then adds overhead and prices to the target margin you enter. The billed amount is the quote, not the rate field.

Can I use this for a commercial cleaning bid?

You can enter any square footage, crew, hours, and costs you have. The space-type menu is only a label. Large or specialized sites may need a different production method; the square-foot quote estimator and the job quote calculator are other ways to run the same cost-and-margin math.

To reuse this math on estimates and invoices, see the Job Quoting Kit — a $29 one-time workbook and PDF guide.

See the Job Quoting Kit — $29 Get the free 2-page worksheet (PDF)

Educational tool only. Not financial, tax, legal, or business advice. No result is guaranteed.